GMC

Home / GMC

We Service and Repair all GMC cars

  • 2015 GMC Acadia

    GMC Acadia
    Mileage
    133,909
    Service Date
    12/18/2024
    Services Performed
    • Check tire tread- comparable brand
    • Mount and balance four tire/wheel assemblies.
    • Road Hazard Warranty: 3 YEAR COVERAGE NATIONWIDE UP TO <25% WORN Includes: Tire Rotation and Balance and Tire Repairs (Tires must be rotated every 6,000 miles and Suspension/ Steering componenets must be in good mechanical condition or Warranty is VOID)
    • Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
     
    RYAN D. gave our service a 5 star review on 12/18/2024
  • 2015 GMC Acadia

    GMC Acadia
    Mileage
    148,749
    Service Date
    12/13/2024
    Services Performed
    • Changed Motor Oil & Replaced Filter, Added REQUIRED QTS VALVOLINE SYNPOWER Motor Oil, Lube Chassis, Check all Fluid Levels
    • Rotate Tires. Visually inspect tires/brakes. NOTE!!!!! Custom Wheels (NON FACTORY WHEELS) MUST be Re-Torqued After 100 Miles to Manufacturer Specs! Beck Automotive is NOT Liable if Re-Torquing is not done by Beck Automotive Technicians (Complementary Re-Torquing)
    • Rear brakes 3mm. Suggest brake pads and rotors, brake flush.
    • Tested and found seat heating element has shorted together. Has a back and cushion element. Suggest replacing as a pair. Seat has to be removed and taken apart.
    • DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
    • BG COOLING SYSTEM SERVICE 2 GALLON (6-8CYL)
     
    DAN C. gave our service a 5 star review on 12/13/2024
  • 2015 GMC Sierra 1500

    GMC Sierra 1500
    Mileage
    76,272
    Service Date
    9/27/2024
    Services Performed
    • Changed Motor Oil & Replaced Filter, Added REQUIRED QTS VALVOLINE SYNPOWER Motor Oil, Lube Chassis, Check all Fluid Levels
    • Rotate Tires. Visually inspect tires/brakes. NOTE!!!!! Custom Wheels (NON FACTORY WHEELS) MUST be Re-Torqued After 100 Miles to Manufacturer Specs! Beck Automotive is NOT Liable if Re-Torquing is not done by Beck Automotive Technicians (Complementary Re-Torquing)
    • Beck Automotive Courtesy Inspection
    • BLOWER MOTOR ASSEMBLY – Remove & Replace CLEAN DEBRIS OUT OF HEATER BOX
    • CABIN AIR FILTER – Remove & Replace
     
    DAVID & EMILY B. gave our service a 5 star review on 9/27/2024
  • 2015 GMC Sierra 1500

    GMC Sierra 1500
    Mileage
    29,853
    Service Date
    9/13/2024
    Services Performed
    • BG OIL SERVICE 3: ENGINE SYNTHETIC OIL PERFORMANCE SERVICE REQUIRED QUARTS SYNTHETIC MOTOR OIL BG MOA EXTENDED LIFE, EPR, AND 44K SERVICE. PN'S 115 109 208 ENGINE AND OR FUEL SYSTEM COVERED WITH BG WARRANTY IF COVERED COMPONENT IN YOUR ENGINE FAILS BG PAYS FOR REPAIR UP TO: PLAN #1: VEHICLES WITH 50,000 MILES OR LESS $6000 PLAN #2: VEHICLES BETWEEN 50,001 AND 80,000 MILES $3000 PLAN#3: VEHICLES BETWEEN 80,001 AND 100,000 MILES $1000
    • BG TRANSMISSION SERVICE 16 QTS SYNTHETIC TRANSMISSION FLUID
    • Rotate Tires. Visually inspect tires/brakes.
    • Beck Automotive Courtesy Inspection
     
    TERESA H. gave our service a 5 star review on 9/23/2024
  • 2016 GMC Terrain

    GMC Terrain
    Mileage
    93,171
    Service Date
    8/14/2024
    Services Performed
    • TRANS FLUSH
    • REPLACE SPARK PLUGS
    • TEST WEAK–NEEDS REPLACED
    • REPLACE SERP BELT
    • coolant flush
    • ck over
    • BG COOLING SYSTEM SERVICE 2 GALLON (6-8CYL)
    • BG TRANSMISSION SERVICE 16 QTS SYNTHETIC TRANSMISSION FLUID
    • FUEL INDUCTION SERVICE
    • SPARK PLUGS – Remove & Replace – V6 All – [Includes: R&I Intake Manifold.]
    • A/C COMPRESSOR DRIVE BELT – Remove & Replace – V6 – [Includes: R&I Engine Mount.] – [Includes: Serpentine and V-Belt type Belt(s).]
     
    STEVE T. gave our service a 5 star review on 8/14/2024
  • 2018 GMC Savana 2500

    GMC Savana 2500
    Mileage
    139,550
    Service Date
    6/12/2024
    Services Performed
    • INSPECTION
    • Changed Motor Oil & Replaced Filter, Added REQUIRED QTS VALVOLINE SYNPOWER Motor Oil, Lube Chassis, Check all Fluid Levels
    • Beck Automotive Courtesy Inspection
    • DISC ROTOR – Remove & Replace – Front,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
    • DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
    • Mount and balance four tire/wheel assemblies.
    • Road Hazard Warranty: 3 YEAR COVERAGE NATIONWIDE UP TO <25% WORN Includes: Tire Rotation and Balance and Tire Repairs (Tires must be rotated every 6,000 miles and Suspension/ Steering componenets must be in good mechanical condition or Warranty is VOID)
    • Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
     
    This vehicle's owner gave our service a 5 star review on 6/12/2024
  • 2014 GMC Terrain

    GMC Terrain
    Mileage
    65,596
    Service Date
    5/31/2024
    Services Performed
    • REPLACE FRONT AND REAR BRAKES AND PADS AND ROTORS AND CLEAN AND LUBE CALIPER SLIDES
     
    JACOB K. gave our service a 5 star review on 6/3/2024
  • 2004 GMC Sierra

    GMC Sierra
    Mileage
    187,201
    Service Date
    3/25/2024
    Services Performed
    • TOWING
    • INSPECT–LEAF SPRING SHACKLE BROKE AND PULLED DRIVESHAFT OUT?–VEH DONT WANT TO GO INTO REVERSE
     
    ANGIE D. gave our service a 5 star review on 3/25/2024
  • 2020 GMC Acadia

    GMC Acadia
    Mileage
    55,541
    Service Date
    3/8/2024
    Services Performed
    • SCOPE ENGINE-CODE P0128–THERMOSTAT BAD est attached
     
    AMY K. gave our service a 5 star review on 3/9/2024
  • 2011 GMC Yukon XL

    GMC Yukon XL
    Mileage
    100,457
    Service Date
    2/16/2024
    Services Performed
    • DID NOT DUPLICATE AT THIS TIME
    • DIAGNOSE–OIL PRESSURE TEST–DIAGNOSE CODE P0521
    • OIL PRESSURE SENDER OR SWITCH – Remove & Replace – [Includes: R&I Intake Manifold.]
    • BRAKE SHOES &/OR PADS – Remove & Replace – Front or Rear – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
    • BRAKE SHOES &/OR PADS – Remove & Replace – Front or Rear – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
    • (Combination) – HUB & ROTOR DISC – Clean & Inspect Corrosion,Each – [Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.]
    • (Combination) – HUB & ROTOR DISC – Clean & Inspect Corrosion,Each – [Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.]
    • (Combination) – HUB & ROTOR DISC – Clean & Inspect Corrosion,Each – [Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.]
    • (Combination) – HUB & ROTOR DISC – Clean & Inspect Corrosion,Each – [Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.]
     
    RICK M. gave our service a 5 star review on 2/16/2024