Changed Motor Oil & Replaced Filter, Added REQUIRED QTS VALVOLINE SYNPOWER Motor Oil, Lube Chassis, Check all Fluid Levels
Rotate Tires. Visually inspect tires/brakes. NOTE!!!!! Custom Wheels (NON FACTORY WHEELS) MUST be Re-Torqued After 100 Miles to Manufacturer Specs! Beck Automotive is NOT Liable if Re-Torquing is not done by Beck Automotive Technicians (Complementary Re-Torquing)
Beck Automotive Courtesy Inspection
CUT INNER FENDER AND PUSH METAL TAB IN TOWARDS THE BACK OF TRUCK AND PAINT
ONLY POP HEARD WAS TIRE HITTING ROCKER PANEL
DID NOT HEAR ANY NOISE OR SEE ANY LOOSE HEAT SHIELDS AT THIS TIME
LOOKS GOOD
NO CODES IN SYSTEM AT THIS TIME
RYAN C. gave our service a 5 star review on 2/16/2026
Diagnostic-Ran Evap Bay Test, test would not complete. Evap System Integrity monitor would not change states. Needs ESIM. Requires removal of Fuel tank to access.
JIM H. gave our service a 5 star review on 11/13/2025
Changed Motor Oil & Replaced Filter, Added REQUIRED QTS VALVOLINE SYNPOWER Motor Oil, Lube Chassis, Check all Fluid Levels
Rotate Tires. Visually inspect tires/brakes. NOTE!!!!! Custom Wheels (NON FACTORY WHEELS) MUST be Re-Torqued After 100 Miles to Manufacturer Specs! Beck Automotive is NOT Liable if Re-Torquing is not done by Beck Automotive Technicians (Complementary Re-Torquing)
Beck Automotive Courtesy Inspection
KEITH F. gave our service a 5 star review on 5/27/2025
Grinding type noise when making left turn-STARTED MAKING BANGING NOISE ON THE WAY HERE
WHEEL HUB – Remove & Replace – 4WD Front,Assembly,One Side – [DOES NOT include wheel alignment.]
Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
Donald S. gave our service a 5 star review on 2/17/2025
REPLACE FRONT AND REAR PADS==OWNER REQUEST NO ROTORS *********** WE ARE NOT RESPONSIBLE FOR BRAKE PAD WEAR OR SQUEAKS OR DUST DUE TO NO ROTOR REPLACEMENT************
TONY W. gave our service a 5 star review on 5/8/2023